Question 1To drive a vehicle carrying materials that require placards, a driver must hold:
- A passenger endorsement
- Any CDL
- Only a medical card
- A CDL with a hazardous materials endorsement, which includes a TSA security threat assessment
Correct answer: A CDL with a hazardous materials endorsement, which includes a TSA security threat assessment
The HME requires passing the hazmat knowledge test and clearing the federal TSA background check and fingerprinting.Question 2Which job belongs to the SHIPPER of hazardous materials?
- Identifying the material, packing, marking and labelling it, and preparing and certifying the shipping papers
- Setting the driver’s schedule
- Inspecting the truck’s brakes
- Driving the load to its destination
Correct answer: Identifying the material, packing, marking and labelling it, and preparing and certifying the shipping papers
The shipper classifies, packages, marks, labels and certifies the shipment; the carrier and driver take it from there.Question 3Which job belongs to the DRIVER before moving a hazmat load?
- Printing the labels
- Choosing the hazard class
- Confirming the shipment is properly described, marked and labelled, checking for leaks, and making sure the right placards are in place
- Writing the shipper’s certification
Correct answer: Confirming the shipment is properly described, marked and labelled, checking for leaks, and making sure the right placards are in place
The driver verifies papers, packages and placards, refuses damaged or leaking items, and keeps the load safe in transit.Question 4While you are driving, where must the hazmat shipping papers be?
- Within your immediate reach while restrained by the seat belt, such as in the driver’s door pouch
- In the trailer with the cargo
- Under the cargo
- In the carrier’s office
Correct answer: Within your immediate reach while restrained by the seat belt, such as in the driver’s door pouch
Papers must be reachable at the controls while driving; when you leave the vehicle they go on the driver’s seat or stay in the door pouch where officials can see them.Question 5A hazmat shipping description on the papers must include:
- The consignee’s phone number only
- Only the driver’s name
- The price of the load
- The identification (UN/NA) number, proper shipping name, hazard class or division, and packing group if any
Correct answer: The identification (UN/NA) number, proper shipping name, hazard class or division, and packing group if any
The basic description identifies the material by number, name, class and packing group so responders know what they face.Question 6How many placards must a placarded vehicle display, and where?
- Four: front, rear and both sides
- Two: both doors
- As many as the shipper likes
- One, on the back
Correct answer: Four: front, rear and both sides
Placards go on all four sides so the warning can be read from any direction.Question 7How large is a standard hazmat placard?
- About 24 inches square
- About 4 inches square
- About 10.8 inches (273 mm), square-on-point
- Size does not matter
Correct answer: About 10.8 inches (273 mm), square-on-point
Placards are diamond-shaped signs 10.8 inches on each side; package labels are the smaller 4-inch diamonds.Question 8Materials in Placard Table 1 (for example Division 1.1 explosives and Division 2.3 poison gas) require placards:
- Only in bulk tanks
- At any quantity
- Never
- Only over 1,001 pounds
Correct answer: At any quantity
Table 1 materials are dangerous enough that any amount carried requires placarding.Question 9For Placard Table 2 materials, placards are required when the aggregate gross weight of the load reaches:
- 1,001 pounds
- 100 pounds
- 5,000 pounds
- 500 pounds
Correct answer: 1,001 pounds
Table 2 categories need placards once the combined gross weight of all Table 2 materials is 1,001 pounds or more.Question 10You are offered a hazmat package that is leaking. What must you do?
- Tape over the leak and go
- Refuse the shipment; a leaking package must not be accepted or moved
- Load it where it cannot be seen
- Load it last
Correct answer: Refuse the shipment; a leaking package must not be accepted or moved
Drivers must refuse leaking or otherwise improper hazmat packages; moving them is illegal and dangerous.Question 11Smoking is prohibited within how many feet of a vehicle loaded with explosives or flammable materials during loading and unloading?
- 10 feet
- 5 feet
- 100 feet
- 25 feet
Correct answer: 25 feet
Keep cigarettes, matches and open flames at least 25 feet away from these loads.Question 12When fueling a vehicle carrying hazardous materials, you must:
- Disconnect the battery
- Fuel only at night
- Keep the engine running
- Turn the engine off and keep someone in control of the nozzle
Correct answer: Turn the engine off and keep someone in control of the nozzle
Engines stay off during fueling of hazmat vehicles, and the nozzle is never left unattended.Question 13A vehicle transporting placarded hazardous materials must carry a fire extinguisher with a minimum UL rating of:
- 10 B:C
- 5 B:C
- 1 A only
- No extinguisher is required
Correct answer: 10 B:C
Hazmat vehicles need at least a 10 B:C rated extinguisher, higher than the standard vehicle requirement.Question 14How often must a driver check the tires on a vehicle hauling hazardous materials?
- At the start of the trip and at every stop
- Never; tires are the shipper’s job
- Once a week
- Only when a tire looks flat
Correct answer: At the start of the trip and at every stop
Tire checks at departure and each stop are a specific hazmat rule, and a failed tire must be repaired properly before continuing.Question 15Which hazmat loads require the driver to stop at every railroad crossing?
- Only loads under 100 pounds
- None; stops are optional
- Vehicles that are placarded (and cargo tanks and buses under their own rules)
- Only empty vehicles
Correct answer: Vehicles that are placarded (and cargo tanks and buses under their own rules)
Placarded vehicles must stop at railroad crossings, check both ways, and proceed only when safe (unless an exempt sign applies).Question 16When parking a vehicle loaded with Division 1.1, 1.2 or 1.3 explosives, you must not park within 300 feet of:
- Bridges, tunnels, buildings or places where people gather, and the vehicle must not be left unattended except in a safe haven
- Another empty truck
- A truck stop
- Any farm
Correct answer: Bridges, tunnels, buildings or places where people gather, and the vehicle must not be left unattended except in a safe haven
Explosives loads need distance from structures and crowds, and attendance or an approved safe haven.Question 17When a hazmat vehicle must legally be attended, the attendant must:
- Be a member of the public
- Be awake and alert, within 100 feet of the vehicle with a clear view of it, and know the hazards and emergency steps
- Be asleep in the sleeper berth
- Be anywhere reachable by phone
Correct answer: Be awake and alert, within 100 feet of the vehicle with a clear view of it, and know the hazards and emergency steps
Attendance means close, awake supervision by someone who understands the load and what to do in an emergency.Question 18Which route choice is best for a long hazmat trip?
- Any route a passenger car would take
- Routes that avoid heavily populated areas, crowds, tunnels and narrow streets where possible, following any state routing rules
- The most crowded downtown streets
- The shortest route no matter what it passes
Correct answer: Routes that avoid heavily populated areas, crowds, tunnels and narrow streets where possible, following any state routing rules
Planning avoids places where an incident would harm the most people, and some states designate hazmat routes.Question 19If you find a hazmat leak at a stop with no fire, your first actions are to:
- Park in a safe place, secure the area, keep people away and upwind, and notify your carrier
- Wash it into a drain
- Drive quickly to the destination
- Cover it with dirt and say nothing
Correct answer: Park in a safe place, secure the area, keep people away and upwind, and notify your carrier
Contain the scene by distance and information: no driving with a growing leak, no contact with the material, help called early.Question 20Near a flammable hazmat spill or vehicle, warning devices used must be:
- Burning flares for visibility
- Reflective triangles, never open-flame flares
- No devices at all
- The four-way flashers only
Correct answer: Reflective triangles, never open-flame flares
Open flames can ignite vapours; use reflective warning devices around flammables.Question 21What is the Emergency Response Guidebook (ERG) used for?
- Replacing shipping papers
- Logging driving hours
- Looking up a material by name or ID number to get first-response safety actions
- Finding fuel prices
Correct answer: Looking up a material by name or ID number to get first-response safety actions
The ERG gives responders the first steps for each material; keep it with the shipping papers.Question 22After a serious hazmat incident (for example a spill that closes a road or injures someone), the carrier must:
- Forget it if the load still arrived
- Only tell the consignee
- Give immediate telephone notice to the National Response Center and file a written incident report
- Wait until the next inspection
Correct answer: Give immediate telephone notice to the National Response Center and file a written incident report
Certain incidents require immediate phone notification and a written follow-up report on the official form.Question 23Why must some hazardous materials never be loaded together in the same vehicle?
- They always have the same labels
- They take up too much room
- Some materials react dangerously with each other; the segregation chart shows which combinations are forbidden
- It is only about paperwork
Correct answer: Some materials react dangerously with each other; the segregation chart shows which combinations are forbidden
Incompatible materials, such as cyanides and acids, are kept apart using the federal segregation table.Question 24How must compressed gas cylinders be transported?
- Secured upright or braced in racks, with valves protected by caps
- Lying loose on the floor
- With the valves removed
- Stacked three high
Correct answer: Secured upright or braced in racks, with valves protected by caps
Cylinders must be held so they cannot fall or roll, and valve protection caps stay on during transport.Question 25When loading Division 1.1 or 1.2 explosives, you must:
- Use metal hooks to move the packages faster
- Turn the engine off and handle packages gently, with no dropping, throwing or hook use
- Load them on top of flammable liquids
- Keep the engine running for the lights
Correct answer: Turn the engine off and handle packages gently, with no dropping, throwing or hook use
Explosives demand gentle handling and a shut-down engine; rough handling or sparks can be catastrophic.Question 26Vehicles hauling chlorine in cargo tanks must carry:
- An approved gas mask and an emergency kit for controlling leaks in the tank fittings
- A spare placard
- Nothing special
- Only a fire extinguisher
Correct answer: An approved gas mask and an emergency kit for controlling leaks in the tank fittings
Chlorine is a poison gas; the manual requires a gas mask and the dome-fitting emergency kit on the vehicle.Question 27The four-digit identification number for a hazmat load must be displayed:
- On placards, orange panels, or the white square-on-point background for bulk packages
- Only in the driver’s log
- On the mud flaps
- It is never displayed
Correct answer: On placards, orange panels, or the white square-on-point background for bulk packages
Bulk shipments show the UN/NA number on orange panels or on the placard so responders can identify the material from a distance.Question 28Gasoline carried in bulk is an example of which hazard class?
- Class 9 miscellaneous only
- Class 1 explosives
- Class 7 radioactive
- Class 3 flammable liquids
Correct answer: Class 3 flammable liquids
Gasoline is the textbook Class 3 flammable liquid.Question 29Sulfuric acid in a cargo tank is an example of which hazard class?
- Class 6 toxic only
- Class 4 flammable solids
- Class 8 corrosive materials
- Class 2 gases
Correct answer: Class 8 corrosive materials
Acids and caustics are Class 8 corrosives; they destroy skin and attack metal.Question 30Before moving any hazmat vehicle, the driver must make sure that:
- Only the rear placard is needed
- The placards match the load described on the shipping papers and are readable from all four sides
- The papers are locked in the trailer
- The load is hidden from view
Correct answer: The placards match the load described on the shipping papers and are readable from all four sides
Papers and placards must agree and be in place before the wheels turn; in an emergency a vehicle may be moved only to a safe place.